Smart LED Chip
-
LC8805B-1515 LED Chip
LC8805B-1515 is an IC addressable pixel integrated 1515 rgb smd led chip. LC8805B-1515 LED is a new 1515 pixel LED, it is 3 wires LED (5v, DAT, GND), it is LC8805B ic inside, which can be compatible with sk6805/ws2812b, same function and same control way. each channel is 5mA, and LC8805B-1515 is 15mA per led.
-
LC8805B-2020 LED Chip
(1) LC8805B-2020 LED is a new 2020 pixel LED,it is same function and same control way with sk6805-EC20,each channel is 5mA.
(2) Smart SMD integrates high-quality external control single-wire serial cascaded constant current IC.
(3) Complete external control pixel, make the color mix uniformity and consistency.
(4) Built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform distortion will not guarantee a line.
(5) Single-wire data transmission, unlimited cascading, data sending rate 800Kbps synchronous refresh.
-
LC8822-2020 LED Chip
LC8822-2020 SMD LED is our new developed 6pin 2020 smd digital led chip, it is upgrade version of APA102C-2020-256 , pin to pin function and can use same pcb design, each led with one independent clock cable and one data wire, with faster signal than the other single wire digital led chips. Each led is a rgb pixel light,which is greatly use as the lighting source of the slim pcb digital led strip, or many other PCBA products.
-
LC8823-2020 LED Chip
(1) LC8823 IC inside LC8823-2020 LED Chip, which can be compatible with APA102/HD107S, same function and same control way, but faster FPWM.
(2) Smart SMD integrates high-quality external control double-wire serial cascaded constant current IC.
(3) Complete external control pixel, make the color mix uniformity and consistency.The default output constant current value OUTR/OUTG/OUTB is 17MA.
(4) Two-wire data transmission, unlimited cascading, the maximum serial input data frequency is 32MHz.The PWM refresh frequency is 27KHz.
(5) No data input, zero power consumption when the light is off.
-
LC8808B-3535 LED Chip
(1) Smart 3535 SMD integrates high-quality external control double-wire serial cascaded constant current IC, but DC12V one led 1pixel addressable, compatible with GS8208, same function with GS8208/WS2815 LED.
(2) The ability to automatically cross the dead pixels, a single point damage does not affect the data transmission and the normal operation of other points.
(3) The default output constant current value OUTR/OUTG/OUTB is 9MA.
(4) Built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform distortion will not guarantee a line.
(5) Built-in power-on reset and power-down reset circuits, the light does not light up after power-on.
(6) Double-wire data transmission, unlimited cascading, data sending rate 800Kbps synchronous refresh.
-
LC8812B-3535 LED Chip
LC8812B-3535/SK6812mini LED are pin to pin function,same lighting effect,same control way. LC8812B-3535 is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit.Its appearance is the same as a 3535 LED . Each LED is a pixel.The data protocol adopts a unipolar return-to-zero code communication method. After the LED is powered on, the DIN terminal receives external signal data, and the data regeneration circuit automatically reshapes and forwards the cascaded output data to ensure that the data is transmitted in series without attenuation and normal transmission.
-
LC8822-3535 LED Chip
(1) LC8822-3535 is an intelligent externally controlled 3535 pixel RGB LED that integrates a control circuit and a light-emitting circuit. It is LC8822 IC inside, compatible with sk9822/APA102C, same control way, each LED is a pixel addressable.
(2) The data transmission adopts clock and data signal protocol, which has long transmission distance and strong anti-interference ability.,and the default output constant current value OUTR/OUTG/OUTB is 19MA.
(3) Built-in power-on reset and power-down reset circuits, the light does not light up after power-on.
(4) Two-wire data transmission, unlimited cascading, the maximum serial input data frequency is 30MHz.
-
LC8823-3535 LED Chip
(1) Smart 3535 SMD integrates high-quality external control double-wire serial cascaded constant current IC, compatible with SK9822/APA102, same control way, 1 led 1pixel addressable.
(2) Complete external control pixel, make the color mix uniformity and consistency.The default output constant current value OUTR/OUTG/OUTB is 17MA.
(3) Built-in power-on reset and power-down reset circuits, the light does not light up after power-on.
(4) Two-wire data transmission, unlimited cascading, the maximum serial input data frequency is 32MHz.
(5) No data input, zero power consumption when the light is off.
(6) The PWM refresh frequency is 27KHz.
-
12V individual addressable L8808B 5050 pixel rgb led chip
(1) Smart 5050 SMD integrates high-quality external control double-wire serial cascaded constant current IC, but DC12V one led 1pixel addressable, compatible with GS8208, same function with GS8208/WS2815 led.
(2) The ability to automatically cross the dead pixels, a single point damage does not affect the data transmission and the normal operation of other points.
(3) The default output constant current value OUTR/OUTG/OUTB is 9MA.
(4) Built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform distortion will not guarantee a line.
(5) Built-in power-on reset and power-down reset circuits, the light does not light up after power-on.
(6) Double-wire data transmission, unlimited cascading, data sending rate 800Kbps synchronous refresh.
-
5V IC and capacitor inside 5050 pixel RGB LC8812 LED Chip
(1) DC5V Smart 5050 SMD integrates high-quality external control single-wire serial cascaded constant current IC. Both IC and capacitor inside LED Chip, no external components are required, allow a simple pcb design.
(2) The default output constant current value OUTR/OUTG/OUTB is 12MA.
(3) Built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform distortion will not guarantee a line.
(4) Built-in power-on reset and power-down reset circuits, the light does not light up after power-on.
(5) Single-wire data transmission, unlimited cascading, data sending rate 800Kbps synchronous refresh.
-
LC8812B-5050 LED
LC8812B-5050 LED is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit. Its appearance is the same as a 5050 LED . Each LED is a pixel, it is same function with addressable pixel 5050 sk6812/ws2812b led, use same pcb design, pin to pin function and same control way. The LED contains an intelligent digital interface data latch signal circuit.Power supply voltage regulator circuit, built-in constant current circuit, data regeneration circuit, high precision RC oscillator, output drive adopts patented PWM technology, which effectively guarantees the color consistency of the each pixel,and the default output constant current value OUTR/OUTG/OUTB is 12MA.
-
LC8812B-RGBW/SK6812RGBW LED
LC8812B-RGBW/SK6812RGBW LED is 4 channels rgbw 4-in-1 digital led chip with 4CH LC8812B-RGBW IC ,It has 4 color chips inside the each led,Red,Green,Blue and “W” color chips. The “W” color cct can be CRI>90 warm white, nature white and cool white, even can be the Yellow or Amber color chips for different options,The RGBW pixel led can be the spi controller control and make your own program for it,also can be dmx controller control with the dmx decoder, or controlled with the artnet controller and work with the software as the madrix, MadMapper,single chip micro computer, Arduino or Raspberry Pi and so on.
